JKS Manufacturing: Trackbar Components

	Locate a Dealer View Cart Dealer Login

    The JKS Adjustable Trackbar is an essential upgrade to any lifted Jeep® still using the OE trackbar. The length is easily adjusted to perfectly center the axle housing beneath the vehicle. Unlike relocation brackets, our Adjustable Trackbar is compatible with virtually any suspension system and allows constant changes as vehicle modifications require.
    The ends of each JKS Adjustable Trackbar feature bushings specifically chosen to provide maximum off-road performance while minimizing the transfer of road noise and
vibrations. A Johnny Joint® spherical polyurethane (2.0" or 2.5"), Dura-Thane™ performance polyurethane or OE rubber bushing is used, depending on each application's requirements.
    Manufactured from 1.25" x 0.250" DOM tubing (or 0.375" thickness for PN OGS121), JKS Adjustable Trackbars are bent to OE specifications for proper geometry and clearance. A zinc plating and durable powdercoat finish provide excellent protection from corrosion and trail debris.

Robust threaded design
enables user to position axle
in 1/16" increments for
extremely precise control

The trackbar controls lateral movement of the axle housing...

It is attached to the chassis and axle on opposite sides of the vehicle with flexible mounting points to accommodate suspension travel. Unfortunately, the fixed length of the OE trackbar won't accommodate ride height adjustments. Changing the distance between mounting points forces the axle housing out of alignment with the rest of the vehicle. Unless corrected, this condition will place unnecessary stress on related suspension and steering components, create alignment problems, and prevent proper suspension & swaybar disconnect operation.

Properly aligns axle housing with chassis on coil sprung Jeeps

Prevents undue stress on related components and centers swaybar for proper disconnect operation

Ultra-strong, DOM tube construction features OE bends for correct geometry and clearance

Zinc plated and powder coated for excellent protection from corrosion and debris

For the best product price please visit a dealer near you.

JK Wrangler, 2007+
Location	Suspension	Chassis End Mount	Axle End Mount	Qty	Part #	Price
Front	0 - 6.0" Lift	OE Rubber Bushing	OE Rubber Bushing	Each	PN OGS121¹	$160.00

Rear	0 - 6.0" Lift	OE Rubber Bushing	OE Rubber Bushing	Each	PN OGS159^{1, 2}	$160.00
¹Compatible with Rubicon and Unlimited models. ²Rear Trackbar Brace PN OGS169 is strongly recommended to reinforce weak factory trackbar mount on axle.

TJ Wrangler, 1997-06
Location	Suspension	Chassis End Mount	Axle End Mount	Qty	Part #	Price
Front	Over 4.0" Lift	2.5" Johnny Joint	OE Rubber Bushing	Each	PN OGS125^{1, 2}	$240.00

Front	1.0 - 3.5" Lift	2.5" Johnny Joint	OE Rubber Bushing	Each	PN OGS126^{1, 2, 3}	$240.00

Rear	0 - 6.0" Lift	Poly Bushing	Poly Bushing	Each	PN OGS153^{2, 7}	$160.00

Rear	Over 3.0" Lift	Poly Bushing	Poly Bushing	Each	PN OGS151B^{2, 4, 6}	$225.00

Rear	Over 3.0" Lift	Poly Bushing	Poly Bushing	Each	PN OGS151^{2, 4, 5}	$160.00
¹Installation requires minor drilling. ²Compatible with TJ Rubicon and Unlimited models. ³Vehicles with Dana 44 front axle (or Dana 30 with aftermarket differential cover) and less than 3" of lift may require bump stop adjustment to prevent interference with differential cover. ⁴Vehicle must be equipped with CV-type rear driveshaft w/double cardan U-joint. ⁵Requires axle bracket (PN OGS160 or equivalent) designed for CV type driveshaft. ⁶Includes required axle bracket (PN OGS160) for CV type driveshaft. ⁷Vehicle must be equipped with slip yoke-type rear driveshaft w/ single cardan U-joint.

XJ Cherokee, 1984-01
Location	Suspension	Chassis End Mount	Axle End Mount	Qty	Part #	Price
Front	Over 4.0" Lift	2.5" Johnny Joint	OE Rubber Bushing	Each	PN OGS125¹	$240.00

Front	1.0 - 3.5" Lift	2.5" Johnny Joint	OE Rubber Bushing	Each	PN OGS126^{1, 2}	$240.00
¹Installation requires minor drilling. ²Vehicles with Dana 30 front axle, aftermarket differential cover and less than 3" of lift may require bump stop adjustment to prevent interference with differential cover.

MJ Comanche, 1986-92
Location	Suspension	Chassis End Mount	Axle End Mount	Qty	Part #	Price
Front	Over 4.0" Lift	2.5" Johnny Joint	OE Rubber Bushing	Each	PN OGS125¹	$240.00

Front	1.0 - 3.5" Lift	2.5" Johnny Joint	OE Rubber Bushing	Each	PN OGS126^{1, 2}	$240.00
¹Installation requires minor drilling. ²Vehicles with Dana 30 front axle, aftermarket differential cover and less than 3" of lift may require bump stop adjustment to prevent interference with differential cover.

WJ Grand Cherokee, 1999-04
Location	Suspension	Chassis End Mount	Axle End Mount	Qty	Part #	Price
Front	1.0 - 6.0" Lift	Poly Bushing	Poly Bushing	Each	PN OGS127	$160.00


ZJ Grand Cherokee, 1993-98
Location	Suspension	Chassis End Mount	Axle End Mount	Qty	Part #	Price
Front	Over 4.0" Lift	2.5" Johnny Joint	OE Rubber Bushing	Each	PN OGS125¹	$240.00

Front	2.0 - 3.5" Lift	2.5" Johnny Joint	OE Rubber Bushing	Each	PN OGS126^{1, 2}	$240.00

Rear	1.0 - 6.0" Lift	Poly Bushing	Poly Bushing	Each	PN OGS155	$160.00
¹Installation requires minor drilling. ²Vehicles with Dana 30 front axle, aftermarket differential cover and less than 3" of lift may require bump stop adjustment to prevent interference with differential cover.



Vehicle	Location	Suspension	Qty	Part #	Price
TJ Wrangler, 1997-06	Rear	Over 3.0" Lift	Each	PN OGS160¹	$65.00
¹Supplied with Adjustable Trackbar PN OGS151B.

Shipping charges will be added at checkout.

Related Links
Installation Instructions PN OGS125, OGS126 PN OGS121 PN OGS127 PN OGS151 PN OGS153 PN OGS155 PN OGS159 PN OGS160	Related Products Over Axle Bracket Front Trackbar Brace Rear Trackbar Brace OE Replacement Trackbar Bracket	Replacement Parts